Found 699 publications. Showing page 19 of 30:
Environmental factors that can influence telomeres are diverse, but the association between telomeres and exposure to environmental contaminants is yet to be elucidated. To date, prior studies have focused on legacy persistent chlorinated pollutants (POPs), while the effects of poly- and perfluoroalkyl substances (PFAS) have been poorly documented. Here, we investigated the associations among PFAS congeners, absolute telomere length (cross-sectional approach), and telomere dynamics (rate of telomere length change over time, longitudinal approach) in one of the most contaminated arctic top predators, the glaucous gull Larus hyperboreus from Svalbard. We further estimated the effect of PFAS on apparent survival rates and re-sighting probabilities using a 10-year capture/recapture dataset (2010–2019). We found that birds exposed to higher concentrations of perfluorononadecanoate (PFNA) (median of 1565 pg/mL of ww in males and 1370 pg/mL of ww in females) and perfluorotetradecanoate (PFTeDA) (median of 370 pg/mL of ww in males and 210 pg/mL of ww in females) showed the slowest rate of telomere shortening. We also found that high blood concentrations of perfluorooctanoate (PFOA) (median of 120 pg/mL of ww in males and 150 pg/mL of ww in females) and perfluorohexanesulfonate (PFHxS) (median of 495 pg/mL of ww in males and 395 pg/mL of ww in females) were positively associated with higher re-sighting probabilities and apparent survival in males but not in females. Our work is the first to report an association between single PFAS compounds and telomeres, and the first to link PFAS exposure with survival probabilities, suggesting that the effect of PFAS exposure might be more tied to the type of compound rather than the total concentration of PFAS.
2020
Risk governance of emerging technologies demonstrated in terms of its applicability to nanomaterials
Wiley-VCH
2020
The quality and relevance of nanosafety studies constitute major challenges to ensure their key role as a supporting tool in sustainable innovation, and subsequent competitive economic advantage. However, the number of apparently contradictory and inconclusive research results has increased in the past few years, indicating the need to introduce harmonized protocols and good practices in the nanosafety research community. Therefore, we aimed to evaluate if best-practice training and inter-laboratory comparison (ILC) of performance of the 3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium (MTS) assay for the cytotoxicity assessment of nanomaterials among 15 European laboratories can improve quality in nanosafety testing. We used two well-described model nanoparticles, 40-nm carboxylated polystyrene (PS-COOH) and 50-nm amino-modified polystyrene (PS-NH2). We followed a tiered approach using well-developed standard operating procedures (SOPs) and sharing the same cells, serum and nanoparticles. We started with determination of the cell growth rate (tier 1), followed by a method transfer phase, in which all laboratories performed the first ILC on the MTS assay (tier 2). Based on the outcome of tier 2 and a survey of laboratory practices, specific training was organized, and the MTS assay SOP was refined. This led to largely improved intra- and inter-laboratory reproducibility in tier 3. In addition, we confirmed that PS-COOH and PS-NH2 are suitable negative and positive control nanoparticles, respectively, to evaluate impact of nanomaterials on cell viability using the MTS assay. Overall, we have demonstrated that the tiered process followed here, with the use of SOPs and representative control nanomaterials, is necessary and makes it possible to achieve good inter-laboratory reproducibility, and therefore high-quality nanotoxicological data.
MDPI
2020
Multidecadal trend analysis of in situ aerosol radiative properties around the world
In order to assess the evolution of aerosol parameters affecting climate change, a long-term trend analysis of aerosol optical properties was performed on time series from 52 stations situated across five continents. The time series of measured scattering, backscattering and absorption coefficients as well as the derived single scattering albedo, backscattering fraction, scattering and absorption Ångström exponents covered at least 10 years and up to 40 years for some stations. The non-parametric seasonal Mann–Kendall (MK) statistical test associated with several pre-whitening methods and with Sen's slope was used as the main trend analysis method. Comparisons with general least mean square associated with autoregressive bootstrap (GLS/ARB) and with standard least mean square analysis (LMS) enabled confirmation of the detected MK statistically significant trends and the assessment of advantages and limitations of each method. Currently, scattering and backscattering coefficient trends are mostly decreasing in Europe and North America and are not statistically significant in Asia, while polar stations exhibit a mix of increasing and decreasing trends. A few increasing trends are also found at some stations in North America and Australia. Absorption coefficient time series also exhibit primarily decreasing trends. For single scattering albedo, 52 % of the sites exhibit statistically significant positive trends, mostly in Asia, eastern/northern Europe and the Arctic, 22 % of sites exhibit statistically significant negative trends, mostly in central Europe and central North America, while the remaining 26 % of sites have trends which are not statistically significant. In addition to evaluating trends for the overall time series, the evolution of the trends in sequential 10-year segments was also analyzed. For scattering and backscattering, statistically significant increasing 10-year trends are primarily found for earlier periods (10-year trends ending in 2010–2015) for polar stations and Mauna Loa. For most of the stations, the present-day statistically significant decreasing 10-year trends of the single scattering albedo were preceded by not statistically significant and statistically significant increasing 10-year trends. The effect of air pollution abatement policies in continental North America is very obvious in the 10-year trends of the scattering coefficient – there is a shift to statistically significant negative trends in 2009–2012 for all stations in the eastern and central USA. This long-term trend analysis of aerosol radiative properties with a broad spatial coverage provides insight into potential aerosol effects on climate changes.
2020
Atmospheric transport is a major pathway of microplastics to remote regions
In recent years, marine, freshwater and terrestrial pollution with microplastics has been discussed extensively, whereas atmospheric microplastic transport has been largely overlooked. Here, we present global simulations of atmospheric transport of microplastic particles produced by road traffic (TWPs – tire wear particles and BWPs – brake wear particles), a major source that can be quantified relatively well. We find a high transport efficiencies of these particles to remote regions. About 34% of the emitted coarse TWPs and 30% of the emitted coarse BWPs (100 kt yr−1 and 40 kt yr−1 respectively) were deposited in the World Ocean. These amounts are of similar magnitude as the total estimated direct and riverine transport of TWPs and fibres to the ocean (64 kt yr−1). We suggest that the Arctic may be a particularly sensitive receptor region, where the light-absorbing properties of TWPs and BWPs may also cause accelerated warming and melting of the cryosphere.
Springer Nature
2020
The Arctic is one of the most rapidly warming regions of the Earth, with predicted temperature increases of 5–7 ∘C and the accompanying extensive retreat of Arctic glacial systems by 2100. Retreating glaciers will reveal new land surfaces for microbial colonisation, ultimately succeeding to tundra over decades to centuries. An unexplored dimension to these changes is the impact upon the emission and consumption of halogenated organic compounds (halocarbons). Halocarbons are involved in several important atmospheric processes, including ozone destruction, and despite considerable research, uncertainties remain in the natural cycles of some of these compounds. Using flux chambers, we measured halocarbon fluxes across the glacier forefield (the area between the present-day position of a glacier's ice-front and that at the last glacial maximum) of a high-Arctic glacier in Svalbard, spanning recently exposed sediments (<10 years) to approximately 1950-year-old tundra. Forefield land surfaces were found to consume methyl chloride (CH3Cl) and methyl bromide (CH3Br), with both consumption and emission of methyl iodide (CH3I) observed. Bromoform (CHBr3) and dibromomethane (CH2Br2) have rarely been measured from terrestrial sources but were here found to be emitted across the forefield. Novel measurements conducted on terrestrial cyanobacterial mats covering relatively young surfaces showed similar measured fluxes to the oldest, vegetated tundra sites for CH3Cl, CH3Br, and CH3I (which were consumed) and for CHCl3 and CHBr3 (which were emitted). Consumption rates of CH3Cl and CH3Br and emission rates of CHCl3 from tundra and cyanobacterial mat sites were within the ranges reported from older and more established Arctic tundra elsewhere. Rough calculations showed total emissions and consumptions of these gases across the Arctic were small relative to other sources and sinks due to the small surface area represented by glacier forefields. We have demonstrated that glacier forefields can consume and emit halocarbons despite their young age and low soil development, particularly when cyanobacterial mats are present.
2020
2020
2020
The response of the atmosphere to solar irradiance and geomagnetic activity is analyzed in experiments with the Whole Atmosphere Community Climate Model (WACCM) under idealized forcings. Four experiments are carried out combining high (H) and low (L) solar radiative forcing with high (7) and low (3) geomagnetic activity: H7 (with high radiative forcing and high geomagnetic activity), H3, (high/low), L7 (low/high), and L3 (low/low). The comparison between these experiment is used to assess the effects of solar radiative forcing and geomagnetic activity mainly on the stratosphere. A two-step Monte Carlo-based statistical test, which defines an impact score, is used to assess statistically significant impacts on regional scales, on pressure levels, for a few key model variables, like NOx, ozone, and temperature.
Under low solar forcing (L7/L3), a statistically significant relationship between geomagnetic activity and NOx is found in both hemispheres and for all seasons. An equally strong relationship is lacking for ozone and temperature when analyzing these fields on isobaric levels. A statistically significant impact on stratospheric ozone is only seen in austral winter and spring. However, vertical cross sections show statistically significant impact on temperature and ozone mainly in the southern hemisphere (SH) during austral winter and the following spring.
Significant and persistent signals in both SH NOx and ozone concentrations are only produced when the effect of high solar forcing is added to high geomagnetic activity (H7). In this case, statistically significant differences are also found for mesospheric temperatures, ozone and NOx. This latter result appears also under low geomagnetic activity as a result of solar forcing alone, suggesting that solar irradiance significantly affects NOx, ozone and stratospheric temperatures and, in some seasons, even tropospheric temperature.
In summary, geomagnetic activity primarily affects NOx and ozone concentrations in the SH. Solar maximum conditions can reduce the amount of NOx in the stratosphere because of higher ozone production. Thus, we conclude that correlations between changes in solar irradiance and geomagnetic activity are important with respect to their effects on the atmosphere. In particular, geomagnetic activity can modulate atmospheric ozone concentrations and other associated stratospheric and tropospheric variables under conditions of high solar activity.
Elsevier
2020
2020
Car Tire Crumb Rubber: Does Leaching Produce a Toxic Chemical Cocktail in Coastal Marine Systems?
Crumb rubber granulate (CRG) produced from end of life tires (ELTs) is commonly applied to synthetic turf pitches (STPs), playgrounds, safety surfaces and walkways. In addition to fillers, stabilizers, cross-linking agents and secondary components (e.g., pigments, oils, resins), ELTs contain a range of other organic compound and heavy metal additives. While previous environmental impact studies on CRG have focused on terrestrial soil and freshwater ecosystems, many sites applying CRG in Norway are coastal. The current study investigated the organic chemical and metal additive content of ‘pristine’ and ‘weathered’ CRG and their seawater leachates, as well as uptake and effects of leachate exposure using marine copepods (Acartia and Calanus sp.). A combination of pyrolysis gas chromatography mass spectrometry (py-GC-MS) and chemical extraction followed by GC-MS analysis revealed similar organic chemical profiles for pristine and weathered CRG, including additives such as benzothiazole, N-1,3-dimethylbutyl-N′-phenyl-p-phenylenediamine and a range of polycyclic aromatic hydrocarbons (PAHs) and phenolic compounds (e.g., bisphenols). ICP-MS analysis revealed g kg–1 quantities of Zn and mg kg–1 quantities of Fe, Mn, Cu, Co, Cr, Pb, and Ni in the CRG. A cocktail of organic additives and metals readily leached from the CRG into seawater, with the most abundant leachate components being benzothiazole and Zn, Fe, Co (metals), as well as detectable levels of PAHs and phenolic compounds. Concentrations of individual components varied with CRG source material and CRG to seawater ratio, but benzothiazole and Zn were typically the organic and metal components present at the highest concentrations in the leachates. While organic chemical concentrations in the leachates stabilized within days, metals continued to leach out over the 30-day period. Marine copepods exposed to high CRG leachate concentrations exhibited high mortalities within 48 h. The smaller lipid-poor Acartia had a higher sensitivity to leachates than the larger lipid-rich Calanus, indicating species-specific differences in vulnerability to leachates. The effect on survival was alleviated at lower leachate concentrations, indicating a dose-response relationship. Benzothiazole and its derivatives appear to be of concern owing to their proven toxicity, while bisphenols are also known to be toxic and were enriched in the leachates relative to the other compounds in the CRG.
Frontiers Media S.A.
2020
In the beginning of April 2020, large fires that started in the Chernobyl Exclusion Zone (CEZ) established after the Chernobyl accident in 1986 caused media and public concerns about the health impact from the resuspended radioactivity. In this paper, the emissions of previously deposited radionuclides from these fires are assessed and their dispersion and impact on the population is examined relying on the most recent data on radioactive contamination and emission factors combined with satellite observations. About 341 GBq of 137Cs, 51 GBq of 90Sr, 2 GBq of 238Pu, 33 MBq of 239Pu, 66 MBq of 240Pu and 504 MBq of 241Am were released in 1st–22nd April 2020 or about 1,000,000,000 times lower than the original accident in 1986 and mostly distributed in Central and East Europe. The large size of biomass burning particles carrying radionuclides prevents long-range transport as confirmed by concentrations reported in Europe. The highest cumulative effective doses (> 15 μSv) were calculated for firefighters and the population living in the CEZ, while doses were much lower in Kiev (2–5 μSv) and negligible in Belarus, Russia and Europe. All doses are radiologically insignificant and no health impact o
Nature Portfolio
2020
As part of the ongoing key comparison BIPM.QM-K1, a comparison has been performed between the ozone standard of Norway maintained by the Norwegian Institute for Air Research (NILU) and the common reference standard of the key comparison, maintained by the Bureau International des Poids et Mesures (BIPM). The instruments have been compared over a nominal ozone amount-of-substance fraction range from 0 nmol/mol to 500 nmol/mol.
2020
Air quality mitigation in European cities: Status and challenges ahead
Cities are currently at the core of air quality (AQ) improvement. The present work provides an overview of AQ management strategies and outcomes in 10 European cities (Antwerp, Berlin, Dublin, Madrid, Malmö, Milan, Paris, Plovdiv, Prague, Vienna) in 2018, and their evolution since 2013 (same cities, plus Ploiesti and Vilnius), based on first-hand input from AQ managers. The status of AQ mitigation in 2018, and its evolution since 2013, were assessed. While results evidenced that the majority of mitigation strategies targeted road traffic, emerging sources such as inland shipping, construction/demolition and recreational wood burning were identified. Several cities had in 2018 the ambition to continue decreasing air pollution concentrations to meet WHO guidelines, an ambition which had not yet been identified in 2013. Specific needs identified by all of the cities assessed were tools to quantify the effectiveness of mitigation strategies and for cost-benefit analysis, as well as specific and up to date technical guidance on real-world road vehicle emissions. The cities also requested guidance to identify mitigation measures promoting co-benefits, e.g., in terms of AQ, climate change, and noise. Support from administrations at local-regional-national-EU scales, and especially involving local policy-makers early on in the air quality management process, was considered essential. This work provides insight into the drivers of successful/unsuccessful AQ policies as well as on the challenges faced during their implementation. We identify knowledge gaps and provide input to the research and policy-making communities as to specific needs of cities.
Elsevier
2020
2020
2020
Regionalized environmental impacts of construction machinery
PURPOSE:
This study aims to establish a regionalized environmental impact assessment of construction machinery equipped with diesel engines certified by the European emission standard Stage V, and operated in cold climatic zones in Europe.
METHOD:
The study quantifies potential environmental impacts associated with construction machinery over the entire lifecycle, from extraction of materials to the end-of-life. For the operation phase, a meso-level emission accounting method is applied to quantify tailpipe emissions for certain subcategories of construction machinery. This is achieved by determining the operational efficiency of each machine in terms of effective hours. The quantified emission data are then adjusted based on engine deterioration models to estimate the rate of increase in emissions throughout the lifetime of each machine. Finally, the CML impact assessment method is applied to inventory data to quantify potential environmental impacts.
RESULTS:
The study shows that tailpipe emissions, which largely depend on an engine’s fuel consumption, had the largest contribution to environmental impacts in most impact categories. At the same time, there was a positive correlation between the operation weight and the impacts of the machinery. Also, machinery with similar operation weight had relatively similar impact patterns due to similar driving factors and dependencies. In addition, network, sensitivity, and uncertainty analyses were performed to quantify the source of impacts and validate the robustness of the study. Results of the sensitivity analysis showed that the responsiveness of the studied systems is very sensitive to changes in the amount of fuel consumption. In addition, the uncertainty results showed that the domain of uncertainty increased as the operation weight subcategory of machinery increased.
CONCLUSION:
This study extends previous work on the life cycle assessment (LCA) of construction machinery, and the methodology developed provides a basis for future extension and improvement in this field. The use of effective hours as the unit of operational efficiency helps to resolve uncertainties linked to lifetime and annual operation hours. Also, the obtained results can be of use for decision support and for assessing the impacts of transition from fossil fuels to alternative fuel types.
2020
Large-eddy simulation (LES) experiments have been performed using the Parallelized LES Model (PALM). A methodology for validating and understanding LES results for plume dispersion and concentration fluctuations in an atmospheric-like flow is presented. A wide range of grid resolutions is shown to be necessary for investigating the convergence of statistical characteristics of velocity and scalar fields. For the scalar, the statistical moments up to the fourth order and the shape of the concentration probability density function (p.d.f.) are examined. The mean concentration is influenced by grid resolution, with the highest resolution simulation showing a lower mean concentration, linked to larger turbulent structures. However, a clear tendency to convergence of the concentration variance is observed at the two higher resolutions. This behaviour is explained by showing that the mechanisms driving the mean and the variance are differently influenced by the grid resolution. The analysis of skewness and kurtosis allows also the obtaining of general results on plume concentration fluctuations. Irrespective of grid resolution, a family of Gamma p.d.f.s well represents the shape of the concentration p.d.f. but only beyond the peak of the concentration fluctuation intensity. In the early plume dispersion phases, the moments of the p.d.f. are in good agreement with those generated by a fluctuating plume model. To the best of our knowledge, our study demonstrates for the first time that, if resolution and averaging time are adequate, atmospheric LES provides a trustworthy representation of the high order moments of the concentration field, up to the fourth order, for a dispersing plume.
Springer
2020
Apex predators are characterized by high levels of biomagnifying organohalogenated contaminants (OHCs) which have been found to induce detrimental health effects in wildlife, such as immune system impairment. The leukocyte coping capacity (LCC) assay is a functional real-time measure of an innate immune response essential in pathogen resistance, known as the respiratory burst. The current study suggests the novel use of this tool to test whether OHCs impair the innate immune system of a sentinel top predator, the white-tailed eagle (Haliaeetus albicilla; WTE). The LCC analysis was performed in the field on WTE nestlings (n = 84) from northern Norway over two breeding seasons. Poly- and perfluoroalkyl substances (PFAS) dominated the total OHC load, surpassing the levels of legacy organochlorines. In addition, we detected significant negative correlations between concentrations of all polychlorinated biphenyls, p,p′-dichlorodiphenyldichloroethylene, perfluorohexane sulfonic acid and long-chain perfluorocarboxylic acids and the LCC of WTE nestlings. Based on our current findings reflecting a potential negative effect of both emerging and legacy OHCs on innate immune capacity, we suggest LCC to be a relevant and accessible test expanding the ecotoxicological toolbox to assess sub-lethal effects of OHCs in apex avian wildlife.
Elsevier
2020
Long-term monitoring of regulated organic chemicals, such as legacy persistent organic pollutants (POPs) and polycyclic aromatic hydrocarbons (PAHs), in ambient air provides valuable information about the compounds' environmental fate as well as temporal and spatial trends. This is the foundation to evaluate the effectiveness of national and international regulations for priority pollutants. Extracts of high-volume air samples, collected on glass fibre filters (GFF for particle phase) and polyurethane foam plugs (PUF for gaseous phase), for targeted analyses of legacy POPs are commonly cleaned by treatment with concentrated sulfuric acid, resulting in extracts clean from most interfering compounds and matrices that are suitable for multi-quantitative trace analysis. Such standardised methods, however, severely restrict the number of analytes for quantification and are not applicable when targeting new and emerging compounds as some may be less stable under acid treatment. Recently developed suspect and non-target screening analytical strategies (SUS and NTS, respectively) are shown to be effective evaluation tools aimed at identifying a high number of compounds of emerging concern. These strategies, combining highly sophisticated analytical technology with extensive data interpretation and statistics, are already widely accepted in environmental sciences for investigations of various environmental matrices, but their application to air samples is still very limited. In order to apply SUS and NTS for the identification of organic contaminants in air samples, an adapted and more wide-scope sample clean-up method is needed compared to the traditional method, which uses concentrated sulfuric acid. Analysis of raw air sample extracts without clean-up would generate extensive contamination of the analytical system, especially with PUF matrix-based compounds, and thus highly interfered mass spectra and detection limits which are unacceptable high for trace analysis in air samples.
In this study, a novel wide-scope sample clean-up method for high-volume air samples has been developed and applied to real high-volume air samples, which facilitates simultaneous target, suspect and non-target analyses. The scope and efficiency of the method were quantitatively evaluated with organic compounds covering a wide range of polarities (logP 2–11), including legacy POPs, brominated flame retardants (BFRs), chlorinated pesticides and currently used pesticides (CUPs). In addition, data reduction and selection strategies for SUS and NTS were developed for comprehensive two-dimensional gas chromatography separation with low-resolution time-of-flight mass spectrometric detection (GC × GC-LRMS) data and applied to real high-volume air samples. Combination of the newly developed clean-up procedure and data treatment strategy enabled the prioritisation of over 600 compounds of interest in the particle phase (on GFF) and over 850 compounds in the gas phase (on PUF) out of over 25 000 chemical features detected in the raw dataset. Of these, 50 individual compounds were identified and confirmed with reference standards, 80 compounds were identified with a probable structure, and 774 compounds were assigned to various compound classes. In the dataset available here, 11 hitherto unknown halogenated compounds were detected. These unknown compounds were not yet listed in the available mass spectral libraries.
2021
Polycyclic aromatic hydrocarbons (PAHs) are not
declining in Arctic air despite reductions in their global emissions.
In Svalbard, the Longyearbyen coal-fired power plant
is considered to be one of the major local sources of PAHs.
Power plant stack emissions and ambient air samples, collected
simultaneously at 1 km (UNIS) and 6 km (Adventdalen)
transect distance, were analysed (gaseous and particulate
phases separately) for 22 nitro-PAHs, 8 oxy-PAHs,
and 16 parent PAHs by gas chromatography in combination
with single quadrupole electron capture negative ionization
mass spectrometry (GC-ECNI-MS) and gas chromatography
in combination with triple quadrupole electron ionization
mass spectrometry (GC-EI-MS/MS). Results confirm low
levels of PAH emissions (Sum 16 PAHs D 1:5 μg/kg coal)
from the power plant. Phenanthrene, 9,10-anthraquinone, 9-
fluorenone, fluorene, fluoranthene, and pyrene accounted for
85% of the plant emission (not including naphthalene). A dilution
effect was observed for the transect ambient air samples:
1.26+/- 0.16 and 0.63+/- 0.14 ng/m3 were the sum of all
47 PAH derivatives for UNIS and Adventdalen, respectively.
The PAH profile was homogeneous for these recipient stations
with phenanthrene and 9-fluorenone being most abundant.
Multivariate statistical analysis confirmed coal combustion
and vehicle and marine traffic as the predominant
sources of PAHs. Secondary atmospheric formation of 9-
nitroanthracene and 2C3-nitrofluoranthene was evaluated
and concluded. PAHs partitioning between gaseous and particulate
phases showed a strong dependence on ambient temperatures
and humidity. The present study contributes important
data which can be utilized to eliminate uncertainties in
model predictions that aim to assess the extent and impacts
of Arctic atmospheric contaminants.
2020
Atmospheric turbulence and in particular its effect on tracer dispersion may be measured by cameras sensitive to the absorption of ultraviolet (UV) sunlight by sulfur dioxide (SO2), a gas that can be considered a passive tracer over short transport distances. We present a method to simulate UV camera measurements of SO2 with a 3D Monte Carlo radiative transfer model which takes input from a large eddy simulation (LES) of a SO2 plume released from a point source. From the simulated images the apparent absorbance and various plume density statistics (centre-line position, meandering, absolute and relative dispersion, and skewness) were calculated. These were compared with corresponding quantities obtained directly from the LES. Mean differences of centre-line position, absolute and relative dispersions, and skewness between the simulated images and the LES were generally found to be smaller than or about the voxel resolution of the LES. Furthermore, sensitivity studies were made to quantify how changes in solar azimuth and zenith angles, aerosol loading (background and in plume), and surface albedo impact the UV camera image plume statistics. Changing the values of these parameters within realistic limits has negligible effects on the centre-line position, meandering, absolute and relative dispersions, and skewness of the SO2 plume. Thus, we demonstrate that UV camera images of SO2 plumes may be used to derive plume statistics of relevance for the study of atmospheric turbulent dispersion.
2020
Past and Future Grand Challenges in Marine Ecosystem Ecology
Frontiers Media S.A.
2020
The white-tailed eagle (Haliaeetus albicilla) in Scandinavia has suffered from impaired reproduction due to high exposure to industrial pollution between the 1960s and 1980s. While population numbers are rising again, new contaminants, such as per- and polyfluoroalkyl substances (PFAS), are increasingly found in high trophic avifauna and are of concern to potentially impact once again on population health. In the present study, we examined PFAS levels in plasma of white-tailed eagle nestlings from northern Norway over the last decade (2008–2017). While PFOA and PFNA exposure did not follow a significant time trend, PFOS and PFHxS concentrations decreased over time, and ≥C11 perfluorinated carboxylic acids only seem to level off during the last four years. This may in fact be the first evidence for a change in the trend for some of these compounds. Furthermore, since several PFAS are expected to be highly present in aqueous film-forming foams used at airports, we also investigate the potential of the two main airports in the region to act as hotspots for PFAS. Our results indeed show decreasing exposure to PFOA with distance to the airports. Altogether, our results seem to show that legislation actions are effective, and continued concern for PFAS exposure of high trophic wildlife is still warranted, even in the northern environment.
2020